Skip to content
TruckBedCoverFinder

Toyota · Factory fitment

Toyota Tundra tire size by year

Every factory tire size the Tundra was sold on from 2000–2026, worked out in inches, with the wheels they were fitted to.

2022–2026 · 3rd gen

265/70R18

32.6" overall · 10.4" section width

Factory wheels: 18x8, 20x8.5

Trim and wheel package decide which of these your truck actually has. The placard inside the driver's door jamb is the authority for your specific vehicle, and it also carries the cold inflation pressures that go with each size.

Tundra factory tire sizes, generation by generation

YearsGenerationFactory tire sizesWheels
2022–2026 3rd gen 265/70R18265/60R20 18x8, 20x8.5
2007–2021 2nd gen 255/70R18275/65R18275/55R20 18x8, 20x8
2000–2006 1st gen 245/70R16265/70R16 16x7

Every Tundra tire size in inches

Metric sizes are hard to compare by eye. Here they are converted — overall diameter is what decides clearance, speedometer accuracy and effective gearing.

SizeOverall diameterSection widthSidewallRevs / mileUsed on
265/70R18 32.6" 10.4" 7.3" 619 2022–2026
265/60R20 32.5" 10.4" 6.3" 620 2022–2026
275/65R18 32.1" 10.8" 7.0" 629 2007–2021
255/70R18 32.1" 10.0" 7.0" 629 2007–2021
275/55R20 31.9" 10.8" 6.0" 632 2007–2021
265/70R16 30.6" 10.4" 7.3" 659 2000–2006
245/70R16 29.5" 9.6" 6.8" 684 2000–2006

Tundra tire sizes — frequently asked

What size tires does a Toyota Tundra take?

The 2022–2026 Toyota Tundra was sold from the factory on 265/70R18, 265/60R20, on 18x8, 20x8.5 wheels. Which one your truck has depends on its trim and wheel package, so check the placard inside the driver's door jamb — that sticker lists the sizes your specific truck left the factory on, together with the correct cold inflation pressures.

How tall is a 265/70R18 tire in inches?

About 32.6 inches overall. The sidewall is 7.3 inches tall (70 per cent figures are of the section width, not the wheel), the section width is 10.4 inches, and it turns roughly 619 revolutions per mile. Those are the numbers to compare against when you are sizing up.

What is the biggest factory tire on a Tundra?

Across 2000–2026 the largest factory size on record is 265/70R18 at about 32.6 inches tall, and the smallest is 245/70R16 at about 29.5 inches. If your truck came on the smaller size, the larger one is a known-good fitment for the same platform — which makes it the safest first upsize, though offset and trim still differ.

Can I put bigger tires on my Tundra without a lift?

Usually one size, around 3 per cent more overall diameter, fits on stock suspension. Past that you are into trimming the front valance or fitting a levelling kit, and the limiting factor is often the wheel offset rather than the tire height — a wider tire on a lower offset hits the fender liner at full lock long before diameter becomes the issue. Work out the exact clearance before you buy.

Do bigger tires affect the Tundra's speedometer?

Yes, proportionally. A tire 3 per cent taller than stock makes the speedometer read about 3 per cent low, so an indicated 70 is really 72, and the odometer under-counts by the same amount. It also shifts the effective gear ratio, which on a truck that tows is felt as softer acceleration and more downshifting on grades.

What wheels fit a Tundra?

Wheel fitment starts with the bolt pattern, then hub bore, then offset. All three for every Tundra generation are on the bolt pattern page for this truck, along with the stud thread and lug torque. The factory wheel sizes on this page tell you what widths and diameters the truck was engineered around.

Same job

Wheels, tires & lift

Spec tires, wheels and a lift without the guesswork.

Read next

Guides that go with this tool

Hands-on testing and fitment advice from the same spec data behind the oem tire size lookup.

All tonneau cover guides →

Find my cover