Chevrolet · Mid-size pickup
Tonneau covers for the Chevrolet Colorado
What fits a Colorado (2005–2026) — exact bed lengths, every cover type rated for the truck, and the fitment details specific to this one.
Chevrolet Colorado · 2005–2026
Yes — standard tonneau covers fit
Colorado bed lengths — match a cover to this:
More than one bed length here — it depends on your cab. Measure your bed to be sure which you have.
No truck-specific gotchas on the Colorado — any correctly-sized tonneau cover will fit. Pick a type by how you use the bed.
Cover types that fit the Colorado
Soft roll-up
FitsVinyl cover on rails that rolls to the cab in seconds.
- Security: low
- Weather: medium
- Price: $
Lowest cost and the most open-bed access; light weather protection.
Hard roll-up
FitsInterlocking aluminium slats that roll up; far more secure than vinyl.
- Security: medium
- Weather: high
- Price: $$
Security and weather without losing roll-back bed access.
Hard folding
FitsThree or four rigid panels that fold forward in stages.
- Security: high
- Weather: high
- Price: $$ to $$$
The all-rounder: strong security, sealed weather, flexible access.
Tri-fold
FitsThree panels (soft or hard) that fold to the cab in one move.
- Security: low to medium
- Weather: medium to high
- Price: $ to $$
Fast value: easy DIY fit and quick fold-up for most owners.
Retractable
FitsSlats that retract into a canister at the bulkhead; lockable at any point.
- Security: high
- Weather: high
- Price: $$$
Premium security with stop-anywhere access; costs bed length and money.
Hinged / one-piece
FitsA single solid lid that hinges up at the cab, like a car boot.
- Security: high
- Weather: high
- Price: $$ to $$$
Sleekest, most secure look on shorter beds; poor for big/tall loads.
Check your Colorado bed before ordering
This truck is sold with more than one bed, and returns are almost always a bed-length mistake rather than a cover fault.
- 1
Tailgate closed
Measure with the tailgate up and latched. Measured with it down, the bed reads about 20 inches long and every cover ordered off that number goes back.
- 2
Inside, along the floor
From the front bulkhead to the inside face of the closed tailgate. Not along the rail tops, not down the outside of the body.
- 3
Note what is already in the bed
A drop-in liner with a lip over the rail, a rack, a toolbox or a factory rail system all sit where a cover's clamps want to go. Every one of those is answerable on the checker.
- 4
Buy for your year
Cover listings are per model year for a reason: rails, tailgates and cargo systems change mid-generation even when the bed length does not.
What size cover the Colorado takes
Covers are sold by bed category. Here is where this truck lands — and every other pickup in the same bracket.
Other Chevrolet trucks
Fitment differs model by model, even inside one brand — bed rails and tailgates are rarely shared.
Colorado cover fitment — frequently asked
Will a tonneau cover fit a Chevrolet Colorado?
Yes. There are no truck-specific obstacles on the Colorado — any cover made in the right bed length fits, and the choice comes down to cover type. Bed lengths on record: 5.2 ft (61.7"), 6.2 ft (74"), 5.1 ft (61.1") and 6.1 ft (72.8").
What size tonneau cover do I need for a Colorado?
It depends on your cab. The Colorado is sold with 4 bed lengths — 5.2 ft (61.7"), 6.2 ft (74"), 5.1 ft (61.1") and 6.1 ft (72.8") — and the cab usually decides which one you have. Measure inside the bed from the bulkhead to the closed tailgate before ordering.
What type of tonneau cover is best for a Colorado?
All of these are made for it: soft roll-up, hard roll-up, hard folding, tri-fold, retractable and hinged / one-piece. There is no single best type — a soft roll-up is the cheapest and opens the bed fully, a hard folding cover trades some of that access for security and weather sealing, and a retractable gives the most security for the most money. Pick by how you use the bed, not by price alone.
Do I need to drill to fit a cover on a Colorado?
No. Mainstream tonneau covers clamp to the bed rails and need no drilling, which also keeps them removable and keeps the truck's finish intact. Anything asking you to drill a factory bed rail is either the wrong part or a specialist rack system, not a cover.
