Rivian · Full-size electric pickup
Tonneau covers for the Rivian R1T
What fits a R1T (2022–2026) — exact bed lengths, every cover type rated for the truck, and the fitment details specific to this one.
Rivian R1T · 2022–2026
Yes — with a couple of things to check
R1T bed length — match a cover to this:
This truck offers a powered factory tonneau
Electric trucks like this often come with — or offer — a powered, lockable tonneau from the factory. Aftermarket cover choice is currently limited and replacing a powered unit is a specialist job.
What to do: If you have the factory powered cover, weigh keeping it. Aftermarket manual covers exist for some EV trucks but the range is small — verify a model-specific fit.
Watch the in-bed Gear Tunnel, frunk, full-size spare and 150 psi air compressor
Your bed has Gear Tunnel, frunk, full-size spare and 150 psi air compressor. It is usually no problem for a tonneau, but make sure the cover does not block access to it or foul on it when closed.
What to do: Check the cover clears the feature in the closed position — most do.
Cover types that fit the R1T
Soft roll-up
FitsVinyl cover on rails that rolls to the cab in seconds.
- Security: low
- Weather: medium
- Price: $
Lowest cost and the most open-bed access; light weather protection.
Hard roll-up
FitsInterlocking aluminium slats that roll up; far more secure than vinyl.
- Security: medium
- Weather: high
- Price: $$
Security and weather without losing roll-back bed access.
Hard folding
FitsThree or four rigid panels that fold forward in stages.
- Security: high
- Weather: high
- Price: $$ to $$$
The all-rounder: strong security, sealed weather, flexible access.
Tri-fold
FitsThree panels (soft or hard) that fold to the cab in one move.
- Security: low to medium
- Weather: medium to high
- Price: $ to $$
Fast value: easy DIY fit and quick fold-up for most owners.
Retractable
FitsSlats that retract into a canister at the bulkhead; lockable at any point.
- Security: high
- Weather: high
- Price: $$$
Premium security with stop-anywhere access; costs bed length and money.
Hinged / one-piece
FitsA single solid lid that hinges up at the cab, like a car boot.
- Security: high
- Weather: high
- Price: $$ to $$$
Sleekest, most secure look on shorter beds; poor for big/tall loads.
Check your R1T bed before ordering
One bed on record, but generations differ by an inch or two — two minutes with a tape saves a return.
- 1
Tailgate closed
Measure with the tailgate up and latched. Measured with it down, the bed reads about 20 inches long and every cover ordered off that number goes back.
- 2
Inside, along the floor
From the front bulkhead to the inside face of the closed tailgate. Not along the rail tops, not down the outside of the body.
- 3
Note what is already in the bed
A drop-in liner with a lip over the rail, a rack, a toolbox or a factory rail system all sit where a cover's clamps want to go. Every one of those is answerable on the checker.
- 4
Buy for your year
Cover listings are per model year for a reason: rails, tailgates and cargo systems change mid-generation even when the bed length does not.
What size cover the R1T takes
Covers are sold by bed category. Here is where this truck lands — and every other pickup in the same bracket.
R1T cover fitment — frequently asked
Will a tonneau cover fit a Rivian R1T?
Yes. Covers are made for it, but the R1T has fitment quirks that decide which version you need — they are listed on this page. Buy for your exact year and bed length, and check those points before ordering. Bed lengths on record: 4.5 ft (54").
What size tonneau cover do I need for a R1T?
One bed length on record: the 4.5 ft at 54 inches. Order a cover listed for your model year and that bed.
R1T: This truck offers a powered factory tonneau — does it affect the cover?
Electric trucks like this often come with — or offer — a powered, lockable tonneau from the factory. Aftermarket cover choice is currently limited and replacing a powered unit is a specialist job. What to do: If you have the factory powered cover, weigh keeping it. Aftermarket manual covers exist for some EV trucks but the range is small — verify a model-specific fit.
R1T: Watch the in-bed Gear Tunnel, frunk, full-size spare and 150 psi air compressor — does it affect the cover?
Your bed has Gear Tunnel, frunk, full-size spare and 150 psi air compressor. It is usually no problem for a tonneau, but make sure the cover does not block access to it or foul on it when closed. What to do: Check the cover clears the feature in the closed position — most do.
What type of tonneau cover is best for a R1T?
All of these are made for it: soft roll-up, hard roll-up, hard folding, tri-fold, retractable and hinged / one-piece. There is no single best type — a soft roll-up is the cheapest and opens the bed fully, a hard folding cover trades some of that access for security and weather sealing, and a retractable gives the most security for the most money. Pick by how you use the bed, not by price alone.
Do I need to drill to fit a cover on a R1T?
No. Mainstream tonneau covers clamp to the bed rails and need no drilling, which also keeps them removable and keeps the truck's finish intact. Anything asking you to drill a factory bed rail is either the wrong part or a specialist rack system, not a cover.
